AUDIO PROCESSOR PRO 2.4 BT

Control your sound straight from your cell phone with a fast and secure BLE connection. Make precise adjustments, share settings and manage up to 4 processors with ease. Taramps technology for those who demand audio performance and freedom.

Description

CONTROL YOUR SOUND FROM YOUR PHONE OR TABLET

A DSP (Digital Signal Processor) is a device placed between the audio source (factory radio, aftermarket head unit, mobile device, etc.) and the amplifier. A DSP allows you to dial in your sound with exact settings, getting the most out of your speakers, subwoofers, and amplifiers. It’s the key to turning good into great.

The Pro 2.4 BT DSP gives you all the tools you need and full access to real-time audio tuning from your smartphone or tablet.

The app allows you to control up to 4 DSPs from the same smartphone and its interface allow portrait or landscape mode.

And there’s more: even before renaming the DSP, the app automatically shows which one is closest, helping you quickly identify the DSP and the system you want to tune. No confusion at events!

After tune each speaker with the Pro 2.4 BT you can share and receive those settings with your friends, with Taramps’ technical support, and anyone you want in an easily and secure way. Sharing is encrypted, so there’s no need to grant access to your device.  It’s a smart solution for exchanging, applying, or requesting custom adjustments.

A well-tuned DSP helps you build a realistic soundstage inside your vehicle. Instruments and vocals are placed exactly where they should be, creating an immersive, studio-like experience while you drive.

The Pro 2.4 BT supports up to 9V— perfect for mixers; it’s lightweight, compact, and easy to install, it offers 2 inputs, 4 outputs, crossovers with filters up to -48 dB, 15-band graphic EQ, 12 preset equalizations, parametric EQ, routing, phase inversion, limiter, clip indicators on inputs and outputs (both physical and in the app), remote signal output to trigger amplifiers, delay alignment per channel, audio generator, high level input with automatic activation, perfect for OEM players and multimedia centers.

If you’re keeping your factory head unit, a DSP is almost a necessity. It compensates for the lack of control on factory systems, giving you the ability to manage everything. It’s the best way to upgrade your audio while keeping your original dashboard intact.

Product videos

Technical information
Connectivity 5.4 BLE (Low-Energy)
Simultaneous connections: Up to 4 products
Typical range, sighted, unobstructed: 25m
App compatibility: Android 8.1 / IOS 16 and above
Maximum input level (RCA, Gain Min): 25Vpp (9V RMS)
(RCA, Gain Max): 5,6Vpp (2V RMS)
(High Level): 28Vpp (10V RMS)
Maximum output level 5,9Vpp (2,1V RMS)
Frequency response (-1dB): 10Hz to 22KHz
Total Harmonic Distortion 0,01%
Signal to Noise Ratio >90dB
Crosstalk (separation between channels) >80dB
Minimum Supply Voltage 10VDC
Maximum Supply Voltage 16VDC
protection system 4 password digits (custumizable)
Input Channels 2
output channels 4
Routing Input / Output routing: A, B, A+B
General gain General gain adjustment: -80 to 0dB
Output gain Output gain adjustment: -45 to +15dB
cutoff frequency variable from 10Hz to 22KHz
Linkwitz Rilley Filters -12, -18, -24, -30, -36, -42, -48dB/octave
Butterworth filters -12, -18, -24, -30, -36, -42, -48dB/octave
Alignment (Delay): 8,0mS (272cm)
Phase 0 / 180º
Threshold -24 to 0dB
attack 0.1mS to 100mS
Release 1mS to 1600mS
Input Equalizer (Graphic input equalizer, 15 bands, 2/3 octave and 12 presets):
Frequencies: 25,40,63,100,160, 250, 400, 630, 1K, 1.6K, 2.5K, 4K, 6.3K, 10K, 16KHz.
Attenuation/Gain: -12dB to +12dB

(Parametric input equalizer):
Center frequency: variable from 10HZ to 22KHz
Attenuation/Gain: -12dB to +12dB
Q-factor adjustment: 0.4 to 10
Individual MUTE function on outputs Yes
Audio Generator (Sine Waveform) Yes
Frequency range Variable from 10Hz to 22KHz
Modes: Fixed frequency / 3-speed sweep
Gain -60 to 0dB
Languages English, Portuguese and Spanish.
Memory Positions Factory default + 3 assignable positions
INPUT IMPEDANCE (RCA): 10K ohms
(high level): 50 ohms
Output Impedance 47 ohms
POWER SUPPLY VOLTAGE (POWER) 10 to 16VDC
Maximum consumption 12,6V: 200mA
Dimensions (W x H x D) 198 x 35 x 130 mm (7.80" x 1.38" x 5.12")
Weight 0.43 Kg (0.95lb)
EAN 7908706603668
Additional Information
Sampling rate: 48KHz
Resolution: 24bits
Output parametric EQ:
Central Frequency: variable from 10Hz to 22KHz
Attenuation / Gain: -12dB to +12dB
Q Factor Adjustment: 0,4 to 10

- The Bluetooth name and logo are owned by the Bluetooth SIG Inc.
- The Android name and logo are owned by Google LLC.
- The iOS name and logo are owned by Apple Inc.
- Typical range in line of sight, unobstructed, in an open environment. Actual product range depends on the
installation environment and may be affected by obstacles such as metal surfaces, walls and other electronic
equipment operating in the same place.
- The APP of the product may be updated from time to time. Taramps reserves the right to update, add, remove or
enhance functionality without prior notice.