In order to promote the safety for your vehicle, Tarsafe has designed TW20-1 G4. It is an automotive alarm with an innovative encrypted anti-cloning system called Hopping Code. It has an anti-theft function via a secret button, automatic alarm activation in an attempt to break into the vehicle, an engine block network in the central and an ultrasound sensor with auto-sensitivity adjustment. In addition to being approved by ANATEL (Brazilian telecommunications agency) and being compatible with all Tarsafe controls manufactured after June 2019, it comes with a remote control and a lithium battery. Safety and quality will always be Taramps’ objective, and this alarm is an example of that.
|Power Supply Voltage||9 to 16V|
|Consumption||6 to 17 mA|
|Engine Block||Mas 20A|
|Turn Signals Outputs||2 x 70W with digital protection|
|Siren Output||Max 200 mA (positive signal)|
|Sound Control Output||Max 200 mA (positive signal)|
|Lock, Unlock, Aux. 1 and 2 Outputs||Max 200 mA (negative signal)|
|Adjustable output to activate default factory locks and electric windows.||Universal, Fiat line, VW UP, G5, G6, G7 and Mobi|
1 remote control TR2;
High durability CR2032 Lithium battery;
Homologated by ANATEL from Brazil;
Fixed frequency 433.92 MHz SAW;
Encrypted Anti-Cloning Hopping Code System;
Controls with new communication protocol and transmission anti-blocking function
The TR2P control with HOME key, that can be registered in the electronic gate central to activate it.
Accepts up to 04 remote control recordings;
Compatible with all Tarsafe controls manufactured after June 2019.
Compatible with 12V vehicles;
Dedicated siren, according to CONTRAN rules;
Motor blocking relay in the control unit;
Command of electric locks;
2 auxiliary outputs that allows you to decide on electric windows or to open the trunk, etc .;
Programmable signal for closing windows, Universal, Fiat (Palio, Idea, Punto, Linea and Strada), VW G5 and VW G6 (Gol, Voyage and Saveiro);
2 Auxiliary outputs when configured G6, to lower the windows and open the trunk;
Sound Control: turn off vehicle sound when turning on the alarm, also turn on vehicle sound when turning off the alarm and open the door;
Self-adjusting ultrasound sensor, triggers the alarm when it detects tampering inside the vehicle;
Led indicating the Alarm Status, external blue and internal red;
Visual (arrows) and audible (beep) signaling;
Output for activating the arrows with digital protection, avoiding the burning of the alarm when closed short at the outputs.
Anti-theft by secret button, blocks the operation of the vehicle if the ignition is switched on, door closed and the secret button is not pressed;
Programmable anti-assault for 1, 2 or 3 minute lockout time. (NEW!)
Valet function: temporarily turn off the anti-theft by secret button, to leave the vehicle in a parking lot, without the need to indicate to the valet the location of the secret button;
Compatible with the presence lock function: lock activated when moving the TR2P (sold separately) remote control away from the vehicle;
Automatic reset of the alarm when turning it off and not opening the door;
Momentary cancellation of the Beep on and off;
Temporary cancellation of the ultrasound sensor via the remote control;
Panic function (warning trigger): pressing the on button on the remote control for 03 seconds;
Locator function (arrows flash for 45 seconds): pressing the auxiliary button for 03 seconds with the alarm on;
Automatic triggering of the alarm when attempting to tamper with the vehicle;
LED trip report: when the alarm is turned off, the LED flashes indicating the sensor that caused the last trip;
Allows the vehicle's arrows to be timed for 10 seconds by pressing the off button on the remote control 02 times;
It locks the doors 08 seconds after switching on the ignition and automatically unlocks after switching off the vehicle's ignition;
Trigger limitation preventing vehicle battery discharge;
02 years of warranty;
1. The TR2 P remote control doesn’t come with the TW20-1 alarm model.
2. Requires installation of auxiliary relay, sold separately.
3. Block the starter.
4. Home key compatible with the Code Learning system.
5. Check compatibility with the control panel.